Tach

[jfjean]

Does anyone have heard about this tach the phone number or there website does not work

check on this site http://www.vtwinplus.com/December_2003/newproducts.html

at the bottom of the page New Digital Tach on the market

Jean

[Skibum]

Watch out for the site listed for the Tach (www.sicfuc.com (http://www.sicfuc.com)), there looks to be a problem with it
Here is what I got when I tried to access it

The Web site that you are trying to access has been blocked following the configurations set for the Web Site Filter.


To view this Web site:
- If the Antifraud Toolbar is available, click Manage Exceptions, and then select This address is always accessible
- If the Antifraud Toolbar is not available, open the main console and add the address in the Antiphishing & Content Protection > Web Site Filter > Approved List



Address: http://landing.domainsponsor.com/?a_id= ... rer_detect (http://landing.domainsponsor.com/?a_id=575&domainname=referer_detect)
Type: Hacking / Proxy Avoidance


Copyright © 1995-2005 Trend Micro Incorporated



Here is another site that lists this Tach
http://hotrodsbikeworks.com/tech/0404hr ... achometer/ (http://hotrodsbikeworks.com/tech/0404hrb_dht_1000_tachometer/)

[Skibum]

Just found this Tach on E-Bay

http://cgi.ebay.com/ebaymotors/Harley-H ... dZViewItem (http://cgi.ebay.com/ebaymotors/Harley-Handlebar-Clamp-Tach-Tachometer_W0QQitemZ260029941785QQcmdZViewItem)

[jfjean]

Does any one have an electrical schematic for the bike the guy that sells the tach on ebay would like to see it

Jean

[asacuta]

The schematic is on page 22-3 of the Rune Service Manual. If you don't have a copy, send me your e-mail address and I'll e-mail the page.

As far as I can tell, there is no specific tach output for the Rune. You'll probably have to tap into the line coming from the ignition pulse generator. That's the yellow wire under the left front side cover. That's where I connected the tach input for my heads-up display. The signal level at this point is fairly low: Honda specifies 0.7 V minimum.