So I have wanted to replace the horn pretty much since day 1. I am finally going to take the time to make it happen and have been looking into how to make that happen. It looks like I need to take the radiator shroud off (I've seen the posts about cracks so will be watching out for those) to get good access to the horn and I figure I might as well change out the coolant while I have it apart. So far a have been having a really miserable time with the bottom plastic fasteners holding the shrouds together. I may be able to go up underneath without taking the shrouds off but I am curious what your experiences have been. Also, what are your thoughts on these different horns and if you had to choose between a High or Low tone, which would you go for?
Wolo (315-2T) Loud One Horn - 12 Volt, High Tone
Learn more: https://smile.amazon.com/dp/B000BRFG..._4UHOEbXF65090
Wolo (310-2T) Loud One Horn - 12 Volt, Low Tone
Learn more: https://smile.amazon.com/dp/B00029XG..._62HOEb5SGDYEB
Not sure I would have room for this one but may be worth considering
SUPER LOUD MARCO TORNADO Compact Air Horn for ALL 12V Vehicles: Motorcycles, Cars, & Trucks
by Sumex International LLC
Learn more: https://smile.amazon.com/dp/B01FMN90..._Q3HOEb01X0KYR
Lastly, have you folks run into any issues changing out the coolant or is it pretty straight forward ? Also do you still use Mother Honda's or is there another brand you favor ?
As always, thank you in advance.