If you have never trailered your Rune please don’t respond. For those who are regular trailering riders, where do you attach tie down straps to the bike? I’m asking because I don’t trust the handlebars and can’t see using the forks where shown due to brake fittings. I’ve used the engine guards with success...so far. I also ratchet strap the rear wheel with rearward pull to offset the forward pressure on the chock. I also put lighter ratchet straps side to side to add extra safety should the chock fail. I use Pingle chocks. I’ve trailered a few thousand miles with no issues. However, recently it was pointed out to me by a moto mechanic I trust that I’m putting too much forward pressure on my chock and should the chock fail I’d be in trouble. FYI, the chock is the type with two pins that mount into a bracket bolted to the trailer floor. What do you guys think? Advice appreciated from those with Rune trailering experience.