Bike runs normal until code comes up. Checked operation of TPS first and it’s operating the way it should. Just was able to catch the setting of FI code while idling in garage code#26. Can’t find code list for NRX 1800 on web only that of GL1800 which isn’t the same. Any help would be appreciated.
Code #26
1 - 5 of 5 Posts
Joined
·
1,058 Posts
Code 26 is one of the knock sensors. Chances are, your knock sensors are OK.
Order a new ECM and keys. I just went through this, as has many others on this forum before me. When my FI code 26 first appeared, I was able to reset it successfully for another 100 or so miles trouble free. Then it set again, and again and again, until it was on constantly. My bike began running so rich, others riding behind me asked if I had a fuel leak of some kind, and the bike also developed a really bad idle and was hard to keep running at city speeds. My knock sensors were OK. The new ECM fixed it for me.
Order a new ECM and keys. I just went through this, as has many others on this forum before me. When my FI code 26 first appeared, I was able to reset it successfully for another 100 or so miles trouble free. Then it set again, and again and again, until it was on constantly. My bike began running so rich, others riding behind me asked if I had a fuel leak of some kind, and the bike also developed a really bad idle and was hard to keep running at city speeds. My knock sensors were OK. The new ECM fixed it for me.
1 - 5 of 5 Posts
Join the discussion
