Rune Rider Forums banner

Custom Lisc Plate Frame

973 Views 0 Replies 1 Participant Last post by  MARUNE
A couple of new members PM / e-mailed me wanting info on my plate frame install.

It was on the old site but here it is again.

I have posted the more pic's in my personal gallery.

The Plate Frame I used is a Pro-One piece, about $149.00.. it is billet / chrome and has a full backing plate with a cover that bolts to the backing from the rear for a nice clean look.

I made up a couple of spacer / adaptors to mount it to the Rune and dropped it down get it out of the sight of the lights and to be able to get rid of the "bumper hitch" of a plate light. I also used a stick on Peterson tape reflector under the frame to cover up the holes left by removing the stock plate light.
See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.